GMAC网卡Fixed-Link模式

GMAC网卡Fixed-Link模式

fixed-link固定链接模式,mac与对端的连接方式是写死的,通常用于mac to mac(不排除mac to phy的情况)。内核要支持fixed-link模式,需要打开CONFIG_FIXED_PHY配置。

社区版linux的gmac网卡platform平台驱动中,在设备树默认下支持fixed-link,gmac网卡platform平台驱动默认不支持ACPI模式。

fixed-link模式的实现,概括起来就两步,

  • 通过fixed_phy_register创建phy device
  • 连接phy device

fixed-link的link状态通常是固定的,但也可以通过gpio GPIOF_DIR_IN寄存器获取。

设备树Fixed-Link实现

以4.19.90内核版本为例其实现方式如下(内核版本5.3之后使用phylink替代了phy lib,实现接口有所不同):

设备树配置中定义fixed-link属性


设备树fixed-link配置

stmac驱动实现of_phy_register_fixed_link函数读取设备树fixed-link属性并通过fixed_phy_register创建phy device,of_phy_connect连接phy device。

stmmac_platform.c:
static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
             struct device_node *np, struct device *dev)
{
... ...
    /* If phy-handle is not specified, check if we have a fixed-phy */
    if (!plat->phy_node && of_phy_is_fixed_link(np)) {
		if ((of_phy_register_fixed_link(np) < 0))
            return -ENODEV;

        dev_dbg(dev, "Found fixed-link subnode\n");
        plat->phy_node = of_node_get(np);
        mdio = false;
    }
... ...
}

stmmac_main.c:
static int stmmac_init_phy(struct net_device *dev)
{
... ...
	if (priv->plat->phy_node) {
		phydev = of_phy_connect(dev, priv->plat->phy_node,
					&stmmac_adjust_link, 0, interface);
... ...
}

通过of_phy_register_fixed_link函数可知,fixed-link的配置方式不只一种

/drivers/of/of_mdio.c:
int of_phy_register_fixed_link(struct device_node *np)
{
	struct fixed_phy_status status = {};
	struct device_node *fixed_link_node;
	u32 fixed_link_prop[5];
	const char *managed;
	int link_gpio = -1;

	if (of_property_read_string(np, "managed", &managed) == 0 &&
	    strcmp(managed, "in-band-status") == 0) {
		/* status is zeroed, namely its .link member */
		goto register_phy;
	}

	/* New binding */
	fixed_link_node = of_get_child_by_name(np, "fixed-link");
	if (fixed_link_node) {
		status.link = 1;
		status.duplex = of_property_read_bool(fixed_link_node,
						      "full-duplex");
		if (of_property_read_u32(fixed_link_node, "speed",
					 &status.speed)) {
			of_node_put(fixed_link_node);
			return -EINVAL;
		}
		status.pause = of_property_read_bool(fixed_link_node, "pause");
		status.asym_pause = of_property_read_bool(fixed_link_node,
							  "asym-pause");
		link_gpio = of_get_named_gpio_flags(fixed_link_node,
						    "link-gpios", 0, NULL);
		of_node_put(fixed_link_node);
		if (link_gpio == -EPROBE_DEFER)
			return -EPROBE_DEFER;

		goto register_phy;
	}

	/* Old binding */
	if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop,
				       ARRAY_SIZE(fixed_link_prop)) == 0) {
		status.link = 1;
		status.duplex = fixed_link_prop[1];
		status.speed  = fixed_link_prop[2];
		status.pause  = fixed_link_prop[3];
		status.asym_pause = fixed_link_prop[4];
		goto register_phy;
	}

	return -ENODEV;

register_phy:
	return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, link_gpio,
						  np));
}
EXPORT_SYMBOL(of_phy_register_fixed_link);

ACPI Fixed-Link实现

本质上ACPI和设备树fixed-link实现是一致的,只是部分接口函数不同,ACPI下可以使用phy_connect_direct进行连接(5.3之后的内核版本使用phylink模式,连接函数是phylink_connect_phy)。

stmmac_platform.c:
int fw_phy_register_fixed_link(struct fwnode_handle *np,
			       struct plat_stmmacenet_data *plat)
{
	struct fixed_phy_status status = {};
	u32 fixed_link_prop[5];
	int size = 5, err;
	int link_gpio = -1;
	struct phy_device *phydev = NULL;

	if (FORCE_FIXED_LINK) {
		status.link = 1;
		status.duplex = DUPLEX_FULL;
		status.speed = SPEED_1000;
		pr_info("force fixed-link busid %d\n", plat->bus_id);
	} else {
		err = fwnode_property_read_u32_array(np, "fixed-link", fixed_link_prop, size);
		if (err) {
			pr_err("----there is no fixed-link property in DSD--\n");
			return 0;
		}
		status.link = 1;
		status.duplex = fixed_link_prop[1];
		status.speed = fixed_link_prop[2];
		status.pause  = fixed_link_prop[3];
		status.asym_pause = fixed_link_prop[4];
	}

	phydev = fixed_phy_register(PHY_POLL, &status, link_gpio, 0);
	if (IS_ERR(phydev)) {
		pr_err("fixed_phy_register failed\n");
		return -1;
	}
	plat->fixedphydev = phydev;
	return 0;
}

stmmac_main.c:
static int stmmac_init_phy(struct net_device *dev)
{
... ...
if (priv->plat->fixedphydev) {
		phydev = priv->plat->fixedphydev;
		if (phy_connect_direct(dev, phydev, &stmmac_adjust_link,
				       interface)) {
			netdev_err(priv->dev, "phy_connect_direct failed\n");
			phydev = NULL;
}
... ...
}

热门相关:龙印战神   重生复仇:腹黑千金不好惹   觅仙道   跟总裁假结婚的日子   夫妻交换