甲方安全建设之日志采集实操干货

2024-04-07 16:01 由合天网安实验室发表于 #其他

前言

没有永远的安全，如何在被攻击的情况下，快速响应和快速溯源分析攻击动作是个重要的话题。想要分析攻击者做了什么、怎么攻击进来的、还攻击了谁，那么日志是必不可少的一项，因此我们需要尽可能采集多的日志来进行分析攻击者的动作，甚至在攻击者刚落脚的时候就阻断攻击者。

安装Elastic+Kibana

Docker安装

这边根据官方文档：https://www.elastic.co/guide/en/elasticsearch/reference/current/docker.html 使用Docker安装了Elastic和Kibana

# 安装es
docker network create elastic

docker pull docker.elastic.co/elasticsearch/elasticsearch:8.12.1

docker run --name es01 --net elastic -p 9200:9200 -it -m 1GB docker.elastic.co/elasticsearch/elasticsearch:8.12.1

# 记录es的密码和注册kibana所需要的token

# 测试es是否正确运行
export ELASTIC_PASSWORD="es_your_password"

docker cp es01:/usr/share/elasticsearch/config/certs/http_ca.crt .

curl --cacert http_ca.crt -u elastic:$ELASTIC_PASSWORD https://localhost:9200

# 安装kibana
docker pull docker.elastic.co/kibana/kibana:8.12.1

docker run --name kib01 --net elastic -p 5601:5601 docker.elastic.co/kibana/kibana:8.12.1

会给出kibana的注册地址，访问填入上述记录的token即可。

不知道是机器性能问题还是Docker安装的问题，es容器经常会挂掉。

RPM安装

根据https://www.elastic.co/guide/en/elasticsearch/reference/current/rpm.html、https://www.elastic.co/guide/en/kibana/current/rpm.html官方文档，可以yum install安装。因为公司访问镜像源被封，因此使用上述文档中下载rpm安装：

# 安装es
wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-8.12.1-x86_64.rpm
wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-8.12.1-x86_64.rpm.sha512
shasum -a 512 -c elasticsearch-8.12.1-x86_64.rpm.sha512 
sudo rpm --install elasticsearch-8.12.1-x86_64.rpm

安装kibana
wget https://artifacts.elastic.co/downloads/kibana/kibana-8.12.1-x86_64.rpm
wget https://artifacts.elastic.co/downloads/kibana/kibana-8.12.1-x86_64.rpm.sha512
shasum -a 512 -c kibana-8.12.1-x86_64.rpm.sha512 
sudo rpm --install kibana-8.12.1-x86_64.rpm

依然在安装es的rpm时，会吐出es/kibana的密码：

The generated password for the elastic built-in superuser is : Fq*S7jxCjFfPu6nN8NG8

es服务可能启动不了，但是安装时会给出启动命令：

 sudo systemctl daemon-reload
 sudo systemctl enable elasticsearch.service

测试es启动是否正常：

export ELASTIC_PASSWORD="Fq*S7jxCjFfPu6nN8NG8"
curl --cacert /etc/elasticsearch/certs/http_ca.crt -u elastic:$ELASTIC_PASSWORD https://localhost:9200

记得改下配置文件，使其监听在0.0.0.0上面：

# /etc/elasticsearch/elasticsearch.yml

# Allow HTTP API connections from anywhere
# Connections are encrypted and require user authentication
http.host: 0.0.0.0

# Allow other nodes to join the cluster from anywhere
# Connections are encrypted and mutually authenticated
transport.host: 0.0.0.0

kibana一样，记得改下配置文件，使其监听在0.0.0.0上面：

# /etc/kibana/kibana.yml
server.host: "0.0.0.0"

安装Fleet和Elastic Agent

在Kibana上，Management->Fleet->Add Fleet Server，先安装Fleet Server，URL填写https协议，端口可以填默认的8220。装好Fleet Server后再装Elastic Agent，Fleet Server也是一个Agent，因此不能在同一台机器上同时装Fleet Server和Elastic Agent。

为了使其Elastic Agent附带Security能力，可以添加各式各样的integrations集成，如到Security->Manage->Get started->Add security integrations安装安全集成：

测试告警

注意，如果有如下错误需解决，否则会无法查阅规则：

【----帮助网安学习，以下所有学习资料免费领！加vx：dctintin，备注 “博客园” 获取！】

　① 网安学习成长路径思维导图
　② 60+网安经典常用工具包
　③ 100+SRC漏洞分析报告
　④ 150+网安攻防实战技术电子书
　⑤ 最权威CISSP 认证考试指南+题库
　⑥ 超1800页CTF实战技巧手册
　⑦ 最新网安大厂面试题合集（含答案）
　⑧ APP客户端安全检测指南（安卓+IOS）

有些规则没开，记得开下，比如我把reverse shell规则打开后：Security->Dashboards->Detection & Response可以看到一些概览：

记录Windows事件管理器日志

安装

Windows事件管理器日志不是单纯的文本，因此需要借助一些工具来帮助我们完成采集的目的。这里使用winlogbeat（https://www.elastic.co/cn/beats/winlogbeat）完成。官方提供了很详细的安装文档（https://www.elastic.co/guide/en/beats/winlogbeat/current/winlogbeat-installation-configuration.html），核心就是配置想要记录的日志类型和对外传输的方案，这里我使用的方案为：

记录的日志类型，我没改，默认就是Security、Application，甚至还有Sysmon
对外传输，我使用了传输到elastic

配置好winlogbeat.yml后可以进行测试配置文件对不对：

.\winlogbeat.exe test config -c .\winlogbeat.yml -e

下面为我的配置文件信息：

###################### Winlogbeat Configuration Example ########################

# This file is an example configuration file highlighting only the most common
# options. The winlogbeat.reference.yml file from the same directory contains
# all the supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/winlogbeat/index.html

# ======================== Winlogbeat specific options =========================

# event_logs specifies a list of event logs to monitor as well as any
# accompanying options. The YAML data type of event_logs is a list of
# dictionaries.
#
# The supported keys are name, id, xml_query, tags, fields, fields_under_root,
# forwarded, ignore_older, level, event_id, provider, and include_xml.
# The xml_query key requires an id and must not be used with the name,
# ignore_older, level, event_id, or provider keys. Please visit the
# documentation for the complete details of each option.
# https://go.es.io/WinlogbeatConfig

winlogbeat.event_logs:
  - name: Application
    ignore_older: 72h

  - name: System

  - name: Security

  - name: Microsoft-Windows-Sysmon/Operational

  - name: Windows PowerShell
    event_id: 400, 403, 600, 800

  - name: Microsoft-Windows-PowerShell/Operational
    event_id: 4103, 4104, 4105, 4106

  - name: ForwardedEvents
    tags: [forwarded]

# ====================== Elasticsearch template settings =======================

setup.template.settings:
  index.number_of_shards: 1
  #index.codec: best_compression
  #_source.enabled: false


# ================================== General ===================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:

# The tags of the shipper are included in their field with each
# transaction published.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
#  env: staging

# ================================= Dashboards =================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here or by using the `setup` command.
#setup.dashboards.enabled: false

# The URL from where to download the dashboard archive. By default, this URL
# has a value that is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:

# =================================== Kibana ===================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

  # Kibana Space ID
  # ID of the Kibana Space into which the dashboards should be loaded. By default,
  # the Default Space will be used.
  #space.id:

# =============================== Elastic Cloud ================================

# These settings simplify using Winlogbeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

# ================================== Outputs ===================================

# Configure what output to use when sending the data collected by the beat.

# ---------------------------- Elasticsearch Output ----------------------------
output.elasticsearch:
  # Array of hosts to connect to.
  hosts: ["your_ip:9200"]

  # Protocol - either `http` (default) or `https`.
  #protocol: "https"

  # Authentication credentials - either API key or username/password.
  #api_key: "id:api_key"
  username: "elastic"
  password: "passwords"

  # Pipeline to route events to security, sysmon, or powershell pipelines.
  pipeline: "winlogbeat-%{[agent.version]}-routing"

# ------------------------------ Logstash Output -------------------------------
#output.logstash:
  # The Logstash hosts
  #hosts: ["localhost:5044"]

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

# ================================= Processors =================================
processors:
  - add_host_metadata:
      when.not.contains.tags: forwarded
  - add_cloud_metadata: ~

# ================================== Logging ===================================

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors, use ["*"]. Examples of other selectors are "beat",
# "publisher", "service".
#logging.selectors: ["*"]

# ============================= X-Pack Monitoring ==============================
# Winlogbeat can export internal metrics to a central Elasticsearch monitoring
# cluster.  This requires xpack monitoring to be enabled in Elasticsearch.  The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#monitoring.enabled: false

# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Winlogbeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch outputs are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:

# ============================== Instrumentation ===============================

# Instrumentation support for the winlogbeat.
#instrumentation:
    # Set to true to enable instrumentation of winlogbeat.
    #enabled: false

    # Environment in which winlogbeat is running on (eg: staging, production, etc.)
    #environment: ""

    # APM Server hosts to report instrumentation results to.
    #hosts:
    #  - http://localhost:8200

    # API Key for the APM Server(s).
    # If api_key is set then secret_token will be ignored.
    #api_key:

    # Secret token for the APM Server(s).
    #secret_token:


# ================================= Migration ==================================

# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: true

数据检索

这时候，可能elastic上面搜不到数据，是因为winlogbeat使用了他自己的索引，默认为winlogbeat-version，笔者测试时，发现kibana上迟迟出现不了该索引，还以为数据传输没成功呢，因此通过如下手段进行排查，先获取es上面的索引信息：

http://your_ip:9200/_cat/indices?v

发现有类似winlogbeat的索引信息：

yellow open   .ds-winlogbeat-8.12.0-2024.02.03-000001   UpWhWCpdR-2WgMVe_kiH9A   1   1     192705            0    131.1mb        131.1mb

后面尝试在kibana上创建一个新的索引即可，v7.17.12版本的kibana创建索引的过程如下：discover->选项->View Discover settings

找到“索引模式”创建一个新的索引即可：

这时候就可以检索事件管理器日志了：

更多网安技能的在线实操练习，请点击这里>>